specifications pin material: brass alloy 360, 1/2 hard ( except swage pins which are annealed ) dimension in inches tolerances on: lengths: .005 diameters: .002 angles: 2 order code: xxxx - x - 0x - xx - 00 - 00 - 0x - 0 basic part # specify pin finish: 01 200 " tin/lead over nickel 15 10 " gold over nickel 21 20 " gold over nickel 34 50 " gold over nickel mill-max-mfg.corp., p.o. box 300, 190 pine hollow road, oyster bay, ny 11771-0300.tel: 516-922-6000 fax: 516-922-9253 178 311x-x-00-xx-00-00-08-0 swage mount in .043 hole 3110/3111 313x-x-00-xx-00-00-08-0 solder mount in .043 mounting hole 3136/3137 6821-0-00-xx-00-00-08-0 wire termination 6821 3132-0-00-xx-00-00-08-0 wire termination material is annealed 3132 3150-x-00-xx-00-00-08-0 swage mount in .043 mounting hole 3150 3148-3-00-xx-00-00-08-0 swage mount in .062 hole for .094 thick board 3148 5601-0-01-xx-00-00-03-0 compliant press-fit in .040.003 plated hole. for .060 .100 thick board. 5601 8815-0-00-xx-00-00-03-0 hex press-fit in .066 plated thru hole 8815 5602-0-01-xx-00-00-03-0 compliant press-fit in .040.003 plated hole. for .090 .130 thick board. 5602 printed circuit pins basic part number 3110-1 3110-2 3110-3 3111-1 3111-2 3111-3 length a .150 .150 .150 .300 .300 .300 length v .051 .082 .113 .051 .082 .113 board thick- ness .031 .062 .094 .031 .062 .094 basic part number board thickness length v 3150-1 3150-2 .031 .062 .051 .082 basic part number 3136-1 3136-2 3136-3 3137-1 3137-2 3137-3 3137-4 board thick- ness .062 .094 .125 .062 .094 .125 .156 length v .082 .110 .145 .082 .110 .145 .185 flange dia. c .078 .062
|